中文站 | 英文站

How to deal with the dust of the wet curtain fan

点击次数: 更新时间:21/08/24 10:37:08 来源: www.ugeindia.com关闭分 享:
    During the long-term use of the wet curtain fan, there will be a lot of dust, impurities and other dirt. In order to prolong the service life of the wet curtain fan, it is necessary to deal with the attached dust in time. Because the dust will have a corrosive effect on the wet curtain fan for a long time, it is very critical to deal with it in time. The following describes how to deal with the dust of the wet curtain fan:
    1. First, disconnect the main power supply of the wet curtain fan, and then disassemble the wet curtain fan.
    2. Unscrew the screw on the filter screen, remove the filter screen, soak it with clean water, and rinse it.
    3. Select the blade form that is difficult to adhere to dust, such as the use of backward blades
    4. Cover the wet curtain fan with a plastic bag, connect the tap water to the spray pipe and the cleaning port, and reversely flush the bottom basin of the wet curtain fan with clean water
    5. After the main part and parts of the wet curtain fan are cleaned, air dry, and then put the parts such as the filter back into the wet curtain fan.
    6. Clean with water regularly and intermittently. Using a mechanical removal device, the attachments can be partially removed. Through warm air and cold air, the temperature difference is formed. A method of spraying powder particles.
    7. After everything is installed, reconnect the main power supply of the wet curtain fan, and you can perform other operations after 5 minutes.
    Therefore, when we are cleaning, we need to pay attention to these problems, in order to do a good job in the treatment of the dust of the wet curtain fan and ensure the normal operation of the equipment.

    上一条:没有了
    下一条:没有了
    查看手机站

    本站部分图片和内容来源于网络,版权归原作者或原公司所有,如果您认为我们侵犯了您的版权请告知我们将立即删除

    Baidu
    map